SLIDING COLD ROOM DOOR 490LWT

DO YOU NEED A SLIDING DOOR FOR A FREEZER ROOM?

Sliding door suitable for cold rooms with negative temperatures up to -45°C, with patented sliding system “Mirror” model.

Suitable for cold rooms used for the preservation of foods at a temperature from –40° and up to –45°C.

Blade edge in anodized aluminum (thickness 151mm) with PVC profile for the second gasket;
Covered with a plastic-coated metal sheet for food application color RAL 9010, thickness 5/10 mm;
Outside handle: lever;
Inside handle: lever;
N°2 EPDM double density gaskets on 3 sides;
Lower gasket in PVC.
Heating cable ~30W/m powered at 220V and put inside the gasket on the blade.

The frontal frame (140mm) with side frame in PVC color RAL 9010; the frame is thermo-welded (45°) up to a thickness equal to 160 mm, beyond such thickness it goes (90°) with joints;
Counter-frame in PVC, color RAL 9010, thermo-welded (45°);
Threshold S/4, the frame (2 jambs + 1 transom) it’s partially put (80 mm) into the floor. At the bottom of the frame are fixed a tubular made of iron (60 x 60 mm) and another one made of stainless steel (60 x 20 mm), which are recessed into the floor. Only the upper part will result visible at the end of the work. Inside the stainless steel tubular there is the heating cable.
Heating cable ~30W/m powered at 220V and put inside the frame.

Aluminum profile: assures the perfect straight sliding of the blade during the opening and the closing;
Clamp: thanks to its sloping level it assures the hermetic closing of the combination door/frame;
Closing cap for the aluminum profile it avoids the accumulation of dirt.

The patented “Mirror” sliding system is totally symmetrical and doesn’t need any adjustment to change the opening way, the product makes it with:

Sliding profile in extruded anodized aluminum, with anti-fall section;
Ramps – on the closing side of the door – or falling bends assure a perfect contact between the door and the frame they provide the best insulation between the inside and the outside of the cold room;
Cover (option), made in extruded anodized aluminum it can be simply opened thanks to the hinges assembled on its top, to realize inspection or cleaning services.

Plastic pulleys, by means of with the door, slides along the “mirror” sliding system; they are adjustable both in height than in-depth,
Adjustable rear register, by means of with the door, slides along the rear guide;
Lower closing hook: plastic hook on the closing side of the frame that assures the hermetic contact between the door and the frame during the closing ;
Striker of the lower closing hook: plastic striker that is on the handle side of the blade. During the closing of the door, it goes into the lower hook and assures the hermetic contact between the door and the frame.

Up to 3000x3500mm;
When both sides have a dimension bigger than 2500 mm, we divide a blade horizontally into two parts (the lower part with H=1250mm while the upper part is given by the difference). In this case, the frame goes dismounted;
For bigger dimensions this type of door, we produce with not standard spare parts (i.e. stainless steel pulleys with aluminum wheels, sliding rail in stainless steel, and so on).