HINGED COLD ROOM DOOR 745LWT

Hinged door for cold rooms with negative temperatures up to -40°C

Suitable for cold rooms used for the preservation of foods at a temperature from –30° and up to –40°C

Blade edge in anodized aluminium (thikness 121 mm) with PVC profile for second gasket;
Covered with plastic-coated metal sheet for food application colour RAL 9010, thickness 5/10;
CSI handle certified EN179:2008, without key;
N. 2 Double density EPDM gasket on 3 sides;
PVC lower gasket;
Heating cable ~30W/m powered at 220V and put inside the gasket on the blade.

Frame and side-frame “L” 110/60 in PVC colour RAL 9010; the frame is thermo-welded (45°) up to a thickness equal to 160 mm, beyond such thickness it’s assembled (90°) with joints;
Counter-frame in PVC, colour RAL 9010, thermo-welded (45°);
Threshold S/4, the frame (2 jambs + 1 transom) it’s partially put (80 mm) into the floor. At the bottom of the frame are fixed a tubular made of iron (60 x 60 mm) and another one made of stainless steel (60 x 20 mm), which are recessed into the floor. Only the upper part will result visible at the end of the work. Inside the stainless steel tubular there is the heating cable;
Heating cable ~30W/m powered at 220V and put inside the frame.

Hinges not adjustable

Up to 1200x2500mm: blade having just the CSI handle;
From 1200x2500mm up to 1500x2500mm: blade having CSI handle + closing latch (additional closing system with spring).

Up to 3000x2500mm;
Mobile part (the right one, if not otherwise specified) and a semi-fixed blade (with 2 internal hatches, 1 upon and 1 below) that can have a total width double compared to the one blade version.
The two blades can have different widths, even if generally the fixed one is more narrow.